73
Manually Erasing Dust (Repair Function)
You can erase dust spots in an image by selecting them one by one.
The dust-erased image becomes a dust-erased image when saved as a
separate image
.
1
In the main window, select the image you want to
erase dust spots.
2
Select the [Tools] menu
`
[Start Stamp tool].
¿
The copy stamp window appears.
3
When the image has redrawn itself, double-click the
point from where dust is to be erased.
¿
The display changes to 100% view.
O
The display position can be changed by dragging.
O
You can also change the display to 100% view by clicking the
[100% view] button.
4
Click the button that matches the dust spots to be
erased.
O
If the dust spot is dark in color, click the [
] button, and if
the dust spot is light in color, click the [
] button.
O
When you move the cursor over the image, the dust erasure
range appears as [ ].
Double-
click
5
Place the dust spot to be erased in the image within
the [ ] and click.
¿
The dust spot within the [ ] is erased.
O
Click on another part of the image to continue to erase dust
spots in the image.
O
To erase dust in another part of the image, click the button
clicked in step 4 again to cancel dust erasure processing and
perform the operation again from step 3.
O
When the dust spot cannot be erased, [
] is displayed.
6
Click the [OK] button to return to the main window.
¿
The [
] mark
is displayed on an image from which dust
spots have been erased.
7
Save as a separate image.
O
The image becomes a dust-erased image by saving as a
separate image
.
Click