Canon 1211B002 - DR 1210C, Руководство пользователя

Страница: 24 / 98

20
Using the Scanner
1. Documents
The scanner can scan documents of the following sizes:
Feeder
Flatbed (Platen Glass)
Make sure to thoroughly read the following cautions for scanning documents
using the feeder:
• When scanning a stack of documents using the feeder, make
sure that the documents are of the same size, stock, and paper
quality. Feeding documents of different sizes or types together
may cause a paper jam.
• Always make sure that the ink on a document is dry before
scanning it. Scanning documents with the ink still wet may soil
the rollers or scanning glass, cause lines or smudges to appear
on images, or dirty other documents.
• Always clean the rollers or scanning glass after scanning a
document written in pencil. Scanning documents with pencil
written on them may soil the rollers or scanning glass, cause
stripes to appear in images, or dirty other documents.
• When scanning a two-sided document that is printed on thin
paper, the image on the opposite side of each page may show
through. Adjust the brightness in the scanning conditions
before scanning the document.
• Scanning the following types of documents using the feeder
may cause paper jams or malfunctions. Scan documents like
these using the flatbed (platen glass).
Width: 5.8" to 8.5" (148 mm to 216 mm)
Length: 3.9" to 14.0" (100 mm to 356 mm)
Thickness: 14 to 32 lb bond (0.0024" to 0.0059")
52 to 128 g/m
2
(0.06 mm to 0.15 mm)
Document Feed
Tray capacity: 35 sheets maximum or stack height of approximately
0.14" (3.5 mm)
Width: 8.5" (216 mm)
Length: 11.7" (297 mm)
Wrinkled or
creased documents Extremely thin,
translucent paper Paper with square
holes
Curled paper Carbon paper
Documents with
paper clips or staples
Torn documents Coated paper
DR-1210C.book Page 20 Monday, December 19, 2005 10:35 AM