Canon 1200D, Инструкция по эксплуатации

Страница: 119 / 342

119
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This function is called Auto
Lighting Optimizer. The default setting is [
Standard ]. With JPEG
images, the correction is applied when the image is captured.
In Basic Zone modes, [
Standard ] is set automatically.
1
Select [Auto Lighting Optimizer].
Under the [
z
2 ] tab, select [ Auto
Lighting Optimizer ], then press
<
0
>.
2
Select the setting.
Select the desired setting, then press
<
0
>.
3
Take the picture.
The image will be recorded with the
brightness and contrast corrected if
necessary.
3
Auto Correction of Brightness and Contrast
N
Under [
5
3: Custom Functions (C.Fn) ], if [ 6: Highlight tone priority ] is
set to [ 1: Enable ], the Auto Lighting Optimizer will be set automatically to
[ Disable ] and the setting cannot be changed.
If the Auto Lighting Optimizer’s effect is too strong and the image is too
bright, set [
Low ] or [ Disable ].
If a setting other than [ Disable ] is set and you use exposure
compensation or flash exposure compensation to darken the exposure,
the image may still come out bright. If you want a darker exposure, set
this function to [
Disable ].
Depending on the shooting conditions, noise may increase.