Canon 0585C006, Инструкция по эксплуатации

Страница: 65 / 108

65
Test Flash and Modeling Flash with a Receiver Unit
In radio transmission wireless shooting, you can fire the test flash and
modeling flash (p.36) from a 430EX III-RT set as a receiver unit.
Select <
N
> or <
M
>.

Press <
8
> of the receiver unit.

Turn <
9
> to select <
N
> or
<
M
>, then press < 8 >.

A flash signal is sent from the
receiver unit to the sender unit, and a
wireless system test flash or
modeling flash is fired.
Test Flash and Modeling Flash with a Receiver Unit

While the flash mode can be set to <
/
> auto external flash metering
when 430EX III-RT is set as a sender unit, this function is effective when
using a receiver unit that supports <
/ > (example: 600EX-RT).

430EX III-RT does not support <
/
>. As a result, when the flash
mode of the sender unit is set to <
/
>, 430EX III-RT units set as the
receivers do not fire. When using 430EX III-RT as a receiver and setting
the flash mode with the sender, do not set the flash mode to <
/ >.

When 430EX III-RT is set as the sender unit and the flash mode of firing
group “A” is set to <
/
>, sender flash firing is not performed even if
430EX III-RT is set to “Sender flash firing: ON” (p.53).

When the flash mode is set to < a > or < / >, exposure is
controlled as a single group to obtain the standard exposure for the main
subject. If you shoot with multiple firing groups pointing toward the main
subject, overexposure may result.

For <
/
>, refer to the instruction manual of a Speedlite compatible
with auto external flash metering.

When you do not want a certain group to fire, select <
E
> when
setting the flash mode in step 3.

The order of firing among firing groups does not need to be consecutive;
for example, A, C, E can be set.

You can set the flash output or flash exposure compensation amount by
simply pressing <
8
>, selecting the firing group using the <
S
> cross
keys, and turning < 9 > (P.Fn-08/p.88).