Canon 0585C006, Инструкция по эксплуатации

Страница: 56 / 108

56
a : Fully Automatic Wireless Flash Shooting
5
Set the flash mode to <
a
>.

Press the < E > button of the
<
S
> cross keys of the sender unit.

Turn <
9
> to select <
Q
>, then
press <
8
>.

The receiver unit is set automatically
to <
a
> during shooting via the
control from the sender unit.

Check that the firing group control is
set to <
8
>.
6
Check the transmission status
and charge status.

Check that the <
D
> lamp is lit in
green.

When the receiver flash is ready, the
AF-assist beam emitter blinks at
approx. 1-second intervals.

Check that the <
Q
> receiver flash-ready
icon is lit on the sender unit’s LCD
panel (<
G
> is not displayed).

For the sender unit’s LCD panel
illumination, see page 54.

Check that the sender unit’s flash-
ready lamp is lit.
7
Check the performance.

Press the sender unit’s test flash button.
 The receiver unit fires. If it does not
fire, check that it is placed within the
transmission range (p.46).
8
Take the picture.

Set the camera and take the picture
in the same way as with normal flash
shooting.
Receiver flash ready
Firing group control