Canoga Perkins EDGEACEESS 9145E, Руководство пользователя, Страница: 31 / 54

Installation 9145E Ethernet Network Interface Device User Manual
Mounting Options
31
1. Install the Rack Mount Bracket Kit, 19" Dual Unit or Rack Mount Bracket Kit, 23" Dual Unit. The
Rack Mount Kit includes two rack mount brackets, two center brackets, a strap, a rear bracket, and
the screws required to attach the brackets to the 9145Es. The mounting brackets attach to the two
threaded holes on the outside of each 9145E, toward the front (see Figure 3-3). The two center
brackets attach to the two threaded holes on the inside of each 9145E, and the strap mounts over
the front of each center bracket (see Figure 3-5). The rear center bracket is attached to the
threaded holes at the top inside corner of the back of each 9145E (see Figure 3-6).
2. Place unit with brackets attached in place on the desired mounting rack.
3. Install two screws through each bracket into the threaded holes of the mounting rack (see Figure
3-7). Torque the screws to the rack manufacturer’s specifications.
Figure 3-7 Two 9145Es Mounted on Rack
3.3.2 Wall Mounting
CAUTION:Fasteners used for wall mounting of the 9145E are required to
withstand a force of three times the weight of the 9145E, applied in
Figure 3-5 Install Center Brackets and Strap Figure 3-6 Install Rear Center Bracket
USER POR
T
LINK/
ACT
SPD
LINK/
ACT
RESET
POWER
STATUS
9145E-
204