Cannondale Treadwell, Быстрый старт

Страница: 13 / 16

Some final pre-ride checks.
Twist Checks. Secure the front wheel between your legs and turn
the handlebar. If the handlebar and wheel move independently, the
stem bolts are not tight enough. Use the torque wrench and correct
bit to properly torque the bolts.
Attempt to rotate the handlebar forward and backward in the stem.
If it moves, the stem faceplate bolts are not tight enough.
Brake Check. Confirm the front and rear brakes engage when the
levers are squeezed. The brake lever and handlebar should not come
into contact with the brakes fully engaged.
Tire Pressure. Inflate tires to the manufacturer’s recommended
ressure marked on the sidewall of the tire.
Wheel Engagement. Verify the front skewer is tight. When properly
tensioned, the wrench should leave an imprint on your hand as you
close it.
E.
F.
G.
H.
I.
SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
E
F
G
I