Cannondale Synapse Carbon страница 28 Скачать руководство пользователя

Страница: 28 / 102

PaRt i

(8) If you disengaged the brake quick-release

mechanism in 3. c. (2) above, re-engage it to

restore correct brake pad-to-rim clearance.

(9) Spin the wheel to make sure that it is centered

in the frame and clears the brake pads; then

squeeze the brake lever and make sure that the

brakes are operating correctly.

4.B. seat Post Cam

aCtion ClamP

Some bikes are equipped with a cam action seat

post binder. The seat post cam action binder works

exactly like the traditional wheel cam action fastener

(Section 4.A.2) While a cam action binder looks like

a long bolt with a lever on one end and a nut on the

other, the binder uses an over-center cam action to

firmly clamp the seat post (see fig. 8a).

WaRninG

Riding with an improperly tightened seat post

can allow the saddle to turn or move and cause

you to lose control and fall. Therefore:

1. Ask your dealer to help you make sure you

know how to correctly clamp your seat post.

2. Understand and apply the correct technique

for clamping your seat post.

3. Before you ride the bike, first check that the

seat post is securely clamped.

adjusting the seat Post Cam action

mechanism

The action of the cam squeezes the seat collar

around the seat post to hold the seat post securely

in place. The amount of clamping force is controlled

by the tension adjusting nut. Turning the tension

adjusting nut clockwise while keeping the cam lever

from rotating increases clamping force; turning it

counterclockwise while keeping the cam lever from

rotating reduces clamping force. Less than half a turn

of the tension adjusting nut can make the difference

between safe and unsafe clamping force.

WaRninG

the fUll foRCe of the Cam aCtion

is needed to ClamP the seat Post

seCURely.

Holding the nut with one hand and turning the

lever like a wing nut with the other hand until

everything is as tight as you can get it will not

clamp the seat post safely.

WaRninG

If you can fully close the cam lever without

wrapping your fingers around the seat post or a

frame tube for leverage, and the lever does not

leave a clear imprint in the palm of your hand,

the tension is insufficient. Open the lever; turn

the tension adjusting nut clockwise a quarter

turn; then try again.

Содержание Synapse Carbon







































































































Результаты поиска

Содержание Synapse Carbon

Отзывы:

Похожие инструкции для Synapse Carbon

Бренды по названию

Популярные бренды

Cannondale Synapse Carbon, Руководство пользователя

Результаты поиска

Содержание Synapse Carbon

Отзывы:

Похожие инструкции для Synapse Carbon

Бренды по названию

Популярные бренды