Cannon CAV 4.1, Руководство по эксплуатации

Страница: 65 / 73

CANNON Instrument Company® | Advanced Setup 59
Table 20 — CAV Data Table Fields
Setting Description
Sample ID Descriptive name given to the sample
INV Invalid test indication
TOL (Tolerance) Acceptable difference in multiple test results for the test
Date Date the test was run
Time Time the test was run
Tube S/N Tube serial number
Tray Bath number
Smple Index Sample position
Bulb Bulb in which the sample ran
Technician The technician logged into VISCPRO when the test was run
Instrument Type Instrument type (CAV, CCS, etc.)
Instrument ID Instrument identification, from
Instrument Settings
Comment Displays comments associated with the sample
Method Name Name of the method used to run the sample
KV Average kinematic viscosity of the sample
% KE % contribution of the kinetic energy correction to the measured viscosity
Known KV Value entered for the known KV of the sample
% Diff KV % difference between the measured KV and the known KV
Temp Average bath temperature
T1-T4 Times for the valid effluxes used in the calculations
% Diff (Max efflux time – Min efflux time)/average efflux time
Abs. Diff Max efflux time – Min efflux time
{1,10} Efflux %d Adds the first 10 efflux times to the analysis
{1,20} Efflux %d Adds the first 20 efflux times to the analysis
Avg Efflux Average efflux time calculated using valid effluxes
C C constant of calibration
E E constant of calibration
SUS Saybolt Furol Seconds calculation
Display Kinematic
Viscosity Data
Displays samples not run with Verify Known KV method (when checked)
Display KV Check Data Displays sample run with Verify Known KV method (when checked)
Max KV % Difference When the
% Diff KV
exceeds this value,
X
is displayed in the
TOL
column