background image

品名:muses2英文说明书
发行日期:2013/12/05
料号:415-13030201-000

版本:v1.0

要求:
1. 128g铜版纸
2. 双面单色印刷
3. 筒包折
4. 要求印刷清晰,对折整齐
5. 所使用材质及工艺符合RoHS/REACH标准要求

更新日志:
12/5 v1.0正式发行

制作:

审核:

批准:

Music

Call

Bluetooth headset

uses2

 

INSTRUCTION

Press the Volume button "+" or "-" to turn volume up 

or down, you hear "beep" voice prompts once reach 

the maximum or minimum. 

 Select "Muses2" . If you phone asks, enter 0000 

(four zeros) for the passcode or accept the 
connection. The LED indicator stops flashing red 
and blue once successfully paired. Voice prompts 
"Connection successful".

NFC Pairing

 Turn on Bluetooth headset, press and hold the 

Multifunction button for about 5 seconds, the LED 
indicator flashes red and blue alternately. Voice 
prompts "Pairing".

 Activate Bluetooth on your phone and set it to 

search for new devices.

Turn on Bluetooth headset, after 5 seconds, hold an 
NFC device against the NFC zone of the Headset. The 
LED indicator flashes red and blue, you hear voice 
prompts "Pairing", the LED indicator stops flashing red 
and blue once successfully paired, you hear voice 
prompts "Connection successful".

NFC detection area

Volume - / Trackforward

/ Trackback

Multifunction button

Status indicator

Turn on / off

Charge port 

Following items are included

Start here

Product overview

USB cable

Ear caps

Basic operation

Volume adjust 

LED indicator and voice prompts 

Instruction

Power on

Power off

Pairing

LED status

Stays blue for 2 seconds

Stays red for 2 seconds

Flashes red and blue alternately

Voice

 

prompts & Alerts 

Power on

Power off

Pairing

Standby

Incoming call

Battery low

Flashes blue twice every 5 seconds

Flashes blue continuously

Flashes red twice every 5 seconds 

Connection successful

Vibration alerts

Battery low

Charging

Red while charging

Blue fully charged

/

Instruction

LED status

Voice

 

prompts & Alerts 

Pair one phone

Pairing

Pair another phone

Multipoint technology enables you to pair another 
phone and take a call from either. 
To pair with another mobile phone, follow the steps 
for “Pair One Phone”. After pairing successfully, 
restart the Headset to connect to 2 paired mobile 
phone automatically.

Answer a call

End a call

Reject a call

Redial the last call

MIC mute on/off

Press the Multifunction button once.

Press the Multifunction button once.

Press and hold the Multifunction button for about 2 
seconds.

Double-press the Multifunction button in standby 
mode. The mobile phone will redial the last call 
number.

Press the Volume button "-" for about 2 seconds to 
mute on/off.

Switch between the Headset and phone

Press the Volume button "+" for about 2 seconds 
during a call, the call will be switched to the mobile 
phone, redo this operation again, the call will be 
switched back to the Headset. 

(Need media player support)

Music play / pause

Press Multifunction button to play / pause music. 

Trackback

Press the Volume button "+" for 2 seconds to skip 
track back. 

Switch Music and Call 

When a call rings during a music playing, the music 
automatically pauses to allow you to answer or 
ignore the call. Once the call is ignored or ends, the 
music is resumed.

Trackforward

Press the Volume button "-" for 2 seconds to skip 
track forward. 

Battery Indicator

More features

When the Headset is connected to a device with iOS 
system, a battery indicator will appear at the upper 
right of the system, indicating battery status of the 
Headset.

Charging

Your new Headset has enough power to pair and 

make a few calls.
When battery is low, you will hear the voice prompt " 

Battery low ". It takes 2.5 hours to fully charge the 

Headset. While charging, the battery indicator light is 

red, the indicator light stays blue once charging is 

complete. 

Power off

Switch the power button to Off position to turn off the 
Headset. (Note: Power off the Headset to save power 
when not in use.)

Hardware reset

Turn on Bluetooth headset, press and hold the 
Multifunction button, connect the Headset to a USB 
charger, hardware reset is done. (Note: The Headset 
automatically power off, please switch the power button to 
off then on to power on the Headset)

End current call and answer new call

When a new call rings during a call, press the 
Multifunction button to answer new call and end 
current call simultaneously.

On hold current call and answer new call

When a new call rings during a call, hold the 
Multifunction button for 2 seconds to hold current 
call and answer new call. To switch between held 
call and active call, Hold the multifunction button for 
2 seconds.

Voice dial

 (Need phone support)

Press the Volume button "+" and "-" in standby 
mode, wait for phone prompt and then tell the 
phone to dial the name of a stored contact.

Clear paired list

Turn on the Headset, connect it to a USB charger of 
USB, press and hold the Volume button "+" and "-" 
simultaneously for about 5 seconds, LED flashes 5 
times, paired list is cleared. (Note: The Headset 
automatically enter pairing mode when power on the 
first time after clear paired list)

FCC ID:2AAIH-MS02

m

Отзывы: