Canmax CM-520, Руководство пользователя, Страница: 184 / 316

Enter 184 End
*/$%ENTR* *ZEND*
7. General Configuration Setting
7-2-4-7 Transmission specific symbols Delay time
Delay time after transmitting specific symbols
* AEBE0 *
Configuration Range Unit Default Setting
0 ~ 2.55 sec 0.01 sec 0
Procedure: Example:
(A) Scan “Enter” barcode
(B) Scan “Transmission specific
symbols Delay
”
barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 0.02 sec, the
parameter value is 0.02 sec / 0.01
sec = 2
7-2-4-8 Transmission Timeout
After sending the information, how long time did not respond will start timeout
*AECE0*
Procedure: Example:
(A) Scan “Enter” barcode
(B) Scan “Transmission Timeout”
barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is.2 sec, the
parameter value is
2 sec / 1 sec = 2
Configuration Range Unit Default Setting
2 ~ 255 sec 1 sec 3