background image

24

ANY AND ALL OTHER REMEDIES AND DAMAGES THAT MAY 

OTHERWISE BE APPLICABLE ARE EXCLUDED, INCLUDING, 

BUT NOT LIMITED TO, INCIDENTAL OR  CONSEQUENTIAL 

DAMAGES OR PUNITIVE DAMAGES.

This limited warranty does not apply to normal wear 

and tear, malfunctions or failures that result from 

abuse, improper assembly, neglect, alteration, improper 

maintenance, crash, misuse or collision. Subject to the 

terms and conditions of this warranty, leaking seals will be 

replaced within 90 days from the original date of purchase. 

Such replacement notwithstanding, seals are subject to 

relative movement between parts and are normal wear 

and-tear items not subject to warranty coverage. This 

limited warranty gives the consumer specific legal rights. 

The consumer may also have other legal rights which vary 

from state to state or country to country. Some states 

and countries do not allow the exclusion or limitation of 

incidental or consequential damages or warranties, so the 

above limitations or exclusions may not apply to you. If it 

is determined by a court of competent jurisdiction that a 

certain provision of this limited warranty does not apply, 

such determination shall not affect any other provision of 

this limited warranty and all other provisions shall remain 

in effect. 
 

THIS IS THE ONLY WARRANTY MADE BY CANE CREEK ON 

ITS SUSPENSION PRODUCTS AND COMPONENTS, AND 

THERE ARE NO WARRANTIES THAT EXTEND BEYOND 

THE DESCRIPTION HEREIN. ANY WARRANTIES THAT 

MAY OTHERWISE BE IMPLIED BY LAW INCLUDING, 

BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE ARE EXCLUDED.

Warranty Information

Содержание DB Kitsuma































Отзывы: