Cane Creek DB Kitsuma, Инструкция по эксплуатации

Страница: 20 / 30

19
1. Slowly release air from
the shock.
WARNING
Failure to remove air
pressure before opening
the shock body can result
in serious injury.
2. Remove the retaining
O-ring from the outer air
canister
Air Volume Adjustment
Air volume can be adjusted by adding volume
reducing spacers inside of the air can. This
adjustment causes the air spring to ramp up at the
end of the shock’s travel which will further increase
the resistance to bottom out.
Air pressure should be only used to achieve the
correct sag value. If the sag measurement of your
air shock is correct (between 25-35% of the shock’s
stroke is compressed with the rider weight positioned
properly on the bike) but the bike uses all of the
shock’s travel too easily or too frequently, consider
adding a volume reduction spacer to the shock.
To install volume reduction spacers:
2.
1.