Candy CTAS 120 Скачать руководство пользователя страница 1

When contacting a 

CANDY or one of its Technical Assistance Centre

always refer to the model (see control panel) and the registration and
series numbers which are indicated at the bottom of the machine under
the lower panel or on the warranty certificate. That is to say, everything
that appears in the box.
Providing this information will ensure a faster and more efficient service.

31

32

INDEX
                                                                                                                                                                                                                                                                

GUARANTEE ..............................................................................  

33

TECHNICAL DATA .......................................................................

34

OPENING THE LID – LOADING ................................................  

35

DETERGENT DISPENSER ........................................................  

36

ACTIVA SYSTEM ........................................................................

37

FUZZY LOGIC .............................................................................

37

PROGRAMME SELECTION .......................................................

37

CONTROL DESCRIPTION ..........................................................

38

TABLE OF PROGRAMMES .......................................................  

42

pág.

Place the adhesive label, in the
corresponding language, in the
support that slots into the back of the
panel display.

EN

This 

Instruction Manual

contains everything you need to
know about the 

everyday

running

 of your machine. Keep

it for future reference.

An 

Installation and

Maintenance Manual

  is also

provided which you should
consult during the 

installation

and routine 

maintenance

  of

your washing machine. The ma-
nual also contains information
about possible 

working

problems

, advice about the

wash load, an explanation of
label symbols and hints about
how to remove 

stubborn stains

.

INTRODUCTION

Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.

1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY

Содержание CTAS 120








Отзывы: