C&S Controls Laser LT RD-1550, Техническое руководство

Страница: 21 / 44

Table 3-4. Port 1, 2, 3 and 4 Serial Menu
Port 1, 2, 3, and 4 Parameter
Parameters Choices Description
BAUD 9600
1200
2400
4800
19200
38400
57600
19200
57600
115200 Baud rate. Selects the transmission speeds for Ports 1, 2, 3, and 4
BITS 8 NONE
7 ODD
7 EVEN Selects the bits of data of Ports 1, 2, 3, and 4
SBITS 1
2 Selects the number of stop bits of Ports 1, 2, 3, and 4
ECHO On
Off This enables or disables echoing of received EDP command characters.
Table 3-3. Serial Communication Menu Summary
Serial Menu
Parameter Choices Description
Port 1, 2, 3, and 4 BAUD
DATA BITS
STOP BITS
ECHO Configure Ports 1, 2, 3, and 4. See Level 3 submenu parameter descriptions.
HOST PORT 2
PORT 1
PORT 3
PORT 4 Allows the user to select which port is connected to the weight indicator or host
device.
KEYDST PORT 2
OFF
PORT 1
PORT 3
PORT 4 Allows the user to select which port the key press data will be sent to.
DAISY OFF
PORT 1
PORT 2
PORT 3
PORT 4 This allows the user to select which port will echo data received from the host
device.
ADDRES 0 through 31 Assign a command address by selecting a number between 0-31. See Section
3.9.1 for Run Mode Commands
Configuration 17