C&D Technologies Liberty DCS, Техническое руководство

Страница: 8 / 38

RS02109/0814/CD 8 www.cdtechno.com
3.3 Installation Equipment, Tools and Supplies
•
Lifting sling or appropriately sized platform – for lifting cells into modules or modules into position.
•
Fork lift or portable crane.
•
Insulated steel toed safety shoes & remove all metals, i.e. rings, etc – to ensure no short circuits.
•
Bicarbonate of soda, 1 lb per gallon of water – to neutralize and clean up any electrolyte.
•
Metric insulated tools – to ensure no short circuits between connections.
•
Insulated torque wrench – to ensure no short circuits between connections.
•
Digital voltmeter with three – digits and 0.25% accuracy minimum – to record initial cell open circuit
voltages & ensure correct assembly.
•
Digital Micro-Ohm meter (DLRO) – to measure connection resistances.
•
Optional, one of the following; resistance, conductance or impedance meter – to record initial
ohmic measurements.
•
Non-metallic brush or pad for cleaning connections – to ensure clean connections for good integrity.
•
NO-OX-ID grease and applicator brush – to ensure good connection integrity throughout service life.
•
Minimum of (2) lifting straps (lifting capacity 500 lbs + each).
Part 4 - Receiving
4.1 Inspection at Time of Delivery
Great care has been taken to pack the battery for shipment to ensure its safe arrival. As soon as you
receive the battery, check the packing material for evidence of damage in transit. If the packing material is
physically damaged or wet acid stains are present, make a notation on the delivery receipt
before you accept
the shipment/delivery.
NOTE:
Freight Carriers generally require that the carriers’
representative inspect concealed damage within 10 days
from date of delivery to determine responsibility.
The resolution of such claims may extend up to nine months.
Verify the number of cartons and skids against the bill of lading and verify their contents against the
packing lists. Keep a copy of the verified lists for your installation records. It is important to confirm that
the accessory package is present and the quantities are correct. If help is required, call C&D customer
service department to report any discrepancies.
4.2 Damage and Shortage Situations
C&D ships FOB Pharr, TX (zip code 78577) (title/ownership passes to the ship-to/end user at the Pharr, TX
warehouse). If shipments are damaged or if cartons or skids are damaged or missing, a claim must be filed
with the carrier. Place an immediate order for replacement with C&D. Pay both the original invoice and the
replacement invoice using the replacement cost as the amount of freight damages or shortages involved as part
of your claim. If individual component items are missing, a shortage report should be filed within
30-days from the date of receiving a shipment with C&D customer service department. Mail (express mail
recommended), e-mail
customersvc@cdtechno.com , call 1-800-543-8630 or fax a copy of the VERIFIED
component-packing list. This verified list should show both the name of the packer, as well as the quantities
of items checked off by the receiver.