Version v0.2
www.canchecked.de
Installation Guide Audi 80 B4
MFA28
Preface
Thank you, for purchasing the “MFA28“ to install in a Audi 80 B4 instrument cluster.
Now high tech is entering your car.
During development, we put high effort into fitting accuracy and quality. The MFA has
been tested and test fitted by several people and will be steady improved, so you will
have no problems during the modification of your instrument cluster.
Despite our great care and tests it can happen that unpredictable difficulties or
problems may occur. This may occur due to many different versions of instrument
panels, which cannot be considered upfront. On the other hand, a very limited space is
available for our MFA28. So please apologize these factors.
If you have any feedback, criticism or change request, do not hesitate to get in contact
with us at
.
Required Tools
-
Phillips screwdriver small
-
MicroUSB cable (for updates and powering the display on your desk)
-
SD card reader (optional)
Advices
The retrofit set is a very sensitive electronical device. Please use an antistatic mat and
wrist band to avoid any damage to the device itself. Avoid high pressure to the device
especially the screen. This may lead to defects or faults in displaying your data.
CANchecked does not assume any liability for this modification or any damage during
modification or during operation. This installation guide has been put together with the
best of our knowledge and belief.
