6 Installation
7 / 18
Please consult the Canadian Solar Inc. Technical support department on the use of inverters in special climates (i.e.
salt, sulfur, or ammonia areas) which may affect the product warranty.
6.2 Mounting Wall-mounting Bracket
Danger
To avoid electrical shock or other injury, please inspect existing electronic or plumbing installations before
drilling holes.
Procedure:
1) Use the wall-mounting bracket as a template and mark the positions of the drill holes, then drill the 4 holes
accordingly, as per FIG. 6-6. (Diameter = 11mm, Depth ≥ 55mm).
Note: The external dimensions (W × H) of inverter are shown as dash line in FIG. 6-6.
237
45
164
74.5
250
374
45
164
74.5
250
FIG.6-6 Drilling Positions (W x H, 399 x 583mm)
2) Knock expansion anchors into the corresponding four holes, and then fix the wall-mounting bracket to the wall with
self-tapping screws, as per FIG. 6-7 & FIG. 6-8.
FIG.6-7 Install Expansion Anchors FIG.6-8 Fix Wall-mounting Bracket
6.3 Installing Inverter
Note: Must make sure the wall-mounting bracket has mounted on the wall firmly before install inverter.
Procedure:
1) Hang the inverter on wall-mounting bracket. Keep balance during the operation to prevent device damage from
colliding with walls or obstacles, as per FIG. 6-9.
2) Use two safety bolts to fix both sides of inverter to ensure the inverter fixed to the wall firmly, as per FIG. 6-10.
FIG. 6-9 Hang the Inverter on Wall-mounting Bracket FIG. 6-10 Fix Both Sides of Inverter
