9 Commissioning Inverter
22 / 32
e) If you choose Generation Limit mode: enable the Generation limit. (NOTE:
This mode can be used only when at
least one of the above two modes is enabled.)
FIG. 9-14 Generation limit
*APP pictures are for reference only.
9.4.5 Exit local mode.
Note: For IOS system, need to turn on Location Services for CSI CloudPro App before using local mode.
9.5 LED Indicators
No.
Operate states
LED Indicators
Flicker frequency
1
Wait
Green LED flicker
1s On
，
1s Off
2
Normal
Green LED always on
/
3
Error
Red LED always on
/
9.6 Switch off
DANGER
Never connect or disconnect the DC connectors under load.
Inverter Turn-off steps:
1) Turn off the AC main switch to prevent it from being reactivated.
2) Turn off the DC switch.
3) Check the inverter operating status.
4) Wait until LED indicator has gone out, which indicates the inverter has been shut down.
