6 Installation
7 / 32
238
45
153
53
250
FIG.6-6 Drilling Positions
2) Drill expansion anchors into the corresponding four holes, and then fix the wall-mounting bracket to the wall with
self-tapping screws (spec, ST 6.3 x 50), as per FIG. 6-7 & FIG. 6-8.
FIG.6-7 Install Expansion Anchors FIG.6-8 Fix Wall-mounting Bracket
6.3 Installing Inverter
Note:
It must be ensured that the wall-mounting bracket is properly fixed was accurately mounted fixed to the wall before
installing the inverter.
Installation steps:
1) Hang the inverter on wal
l
-mounting bracket. Keep balance during the operation to prevent device damage from
colliding with walls or obstacles, as per FIG. 6-9.
2) Use two safety bolts to fix both sides of inverter to ensure the inverter fixed to the wall firmly, as per FIG. 6-10.
FIG. 6-9 Hang the Inverter on Wall-mounting Bracket FIG. 6-10 Fix Both Sides of Inverter
