CanadianSolar CSI-3.68K-S22002-E, Руководство пользователя

Страница: 10 / 28

6 Installation
7 / 19
6.2 Mounting Wall-mounting Bracket
Danger
To avoid electrical shock or other injury, please inspect existing electronic or plumbing installations
before drilling holes.
Installation steps:
1) Use the wall-mounting bracket as a template and mark the positions of the drill holes, then drill the 4 holes
accordingly, as per FIG. 6-6. (Diameter = 11mm, Depth ≥ 55mm
）
Note: The external dimensions (W × H) of inverters are shown as a dashed line in FIG. 6-6.
191
45
121
74 160
238
45
153
53 250
CSI-3K-S22002-E (308 x 357mm) CSI-3.68/5K-S22002-E (355 x 435mm)
FIG.6-6 Drilling Positions
2) Drill expansion anchors into the corresponding four holes, and then
secure the bracket by using screws
, as per FIG.
6-7 & FIG. 6-8.
FIG.6-7 Install Expansion Anchors FIG.6-8 Fix Wall-mounting Bracket
6.3 Installing Inverter
Note: It must be ensured that the wall-mounting bracket is properly fixed was accurately mounted fixed to the wall before
installing the inverter.
Installation steps:
1) Hang the inverter on wal
l -mounting bracket. Keep balance during the operation to prevent device damage from
colliding with walls or obstacles, as per FIG. 6-9.
2) Use two safety bolts to fix both sides of inverter to ensure the inverter fixed to the wall firmly, as per FIG. 6-10.
FIG. 6-9 Hang the Inverter on Wall-mounting Bracket FIG. 6-10 Fix Both Sides of Inverter