Top mount cover lifter (CRS 20)
Top Mount Cover Lifter Operation
• Open cover and fold in half.
• You can also lift the cover by standing
outside the hot tub.
• Grab on to the bar with the foam grip and
pull upward and back.
• You can also enter the hot tub and push the
cover up from the center.
• To close the cover from inside the spa, pull
the cover back towards you until it is resting
on the sides of the spa. Get out of the
tub and fold the top half of the cover.
• Position the spa cover on the spa, making
sure that all four corners are properly
positioned and square on the spa.
• Do not use the Canadian Spa Company top
Mount Cover Lifter in high wind conditions.
Injury from the spa cover being blown over
and impacting the spa user can occur.
1
2
3
4
