REF Illustration
Description
QTY
A
Seat
1
B
Seat supports
3
C
6
D
Wedge Anchors
Components
Assembly Instruction CAL-810
M10 Connecting Screws
Страница 1: ...REF Illustration Description QTY A Seat 1 B Seat supports 3 C 6 D Wedge Anchors 6 Components Assembly Instruction CAL 810 M10 ConnectingScrews ...
Страница 2: ... and linesman plier Recommendations Assembly Instruction CL 810 In order to avoid damages to the powdercoat finish please leave all unwrapped parts on a non marring surface Do not place unassembled parts on rough surfaces such as cement Apply touch up paint on damages or scratches immediately to prevent rust build up Install screws bolts and hex nuts with washers Tighter carefully to avoid damagin...
Страница 3: ...max during tightening 2 Remove any dust or residues from the hole with a blower or similar tool 3 Hammer the expansion bolt into the hole Gently tap the wedge anchors until it is at the bottom of the drilled hole followed by two or three solid blows to compact the lead Make sure the nut has not been over tightened unnecessary stress on the wedge anchors can cause it to break Instruction for Surfac...
