Rev 1.0
40
9.3.2.4
round meter
The r
ound meter
is a classical display, which is already known from the Gen1 CANchecked data
displays. Different sizes and color gradients are possible here. In the figure below, one large and four
small r
ound meters
with different color gradients are visible. The central value does not belong to the
round meter
widget but is a separate
sensor value
widget.
Figure 33: Display view different round meters
As with
vertical bar
, the color gradient of the
round meter
can also be adjusted. The name can be
changed in size and position (
offset
). As with the
vertical bar
, the min value and
max value
functions
can be used to set the values for the start and end of the
round meter
.
The position of the start and the end can be adjusted in angles, where 12 o'clock stands for 0
degrees. -120 degrees is eight o'clock and 120 degrees is four o'clock. The
ghost time
function can be
used to generate a split-seconds pointer. With this, the pointer stops for a few milliseconds after the
peak and facilitates readability during operation.
Figure 34: Configuration round meter
In the example shown above, the
sensor
IntakeT was assigned to the
round meter
. The scale here
only extends from nine to three o'clock with minimum and maximum values of 0 and 60 degrees.
Содержание MFD28 Gen2
Страница 1: ...MFD28 32 Gen2 Manual...
