Can-Am SPYDER RT Series 2020, Оригинальное руководство пользователя

Страница: 138 / 203

134
DIAGNOSTIC GUIDELINES
NOTICE If the vehicle must be trans-
ported, do not have it towed
—
towing
can seriously damage the vehicle. Re-
fer to
T
RANSPORTING THE
V
EHICLE
in
this section for detailed instructions.
Will not Shift into Neutral
If the gearbox cannot shift into neutral
when vehicle is not moving:
1. The engine speed will be auto-
matically increased to approxi-
mately 1300 RPM then it will be
brought back to idle speed.
2. Up to 3 attempts will be done.
3. If it does not work, retry pressing
upshift or downshift.
Will not Shift
Have your vehicle transported to the
nearest Can-Am On-Road dealer.
Engine Does Not Start
Engine does not turn over
1. Scrolling safety message on the
multifunction gauge not acknowl-
edged.
‒
R
EAD THE SAFETY MESSAGE
THEN PRESS THE
MODE
BUT-
TON
.
2. Engine stop switch in the OFF
position.
‒
M
AKE SURE THAT THE ENGINE
STOP SWITCH IS IN THE
ON
POSI-
TION
.
3. Ignition switch in the OFF posi-
tion.
‒
T
URN THE IGNITION TO THE
ON
POSITION
.
4. Battery dead or poor battery con-
nections.
‒
C
HECK THE BATTERY CHARGE
.
R
ECHARGE IF NECESSARY
(
SEE
MAINTENANCE PROCEDURES
).
‒
C
HECK THE BATTERY CONNEC-
TIONS IN THE FRONT STORAGE
COMPARTMENT
(
SEE MAINTE-
NANCE PROCEDURES
).
5. Blown fuse.
‒
C
HECK FUSE CONDITION
(
SEE
THE
H
OW TO REPLACE FUSES
AND LIGHTS IN THIS SECTION
).
6. Transmission is in gear.
‒
D
EPRESS BRAKE PEDAL IF TRANS-
MISSION IS IN GEAR
.
7. The key is not read.
If the immobilizer system cannot
read the key, the engine will not
start. The following conditions can
lead to the immobilizer system
failing to read the key:
- Damaged computer chip
- Large metallic object near the
key
- Electronic device near the key
- Second electronic coded key
near the main key
- Other strong electromagnetic
field in the key area
‒
I
F THE ENGINE DOES NOT START
AND A KEY ERROR MESSAGE IS
DISPLAYED IN THE CLUSTER
,
MAKE SURE THAT NONE OF
THE ABOVE CONDITIONS ARE