FLUIDS
rmo2008-002-509_a
1. Damping pad backing
3. Position new damping pads over existing pads
on vehicle plate support.
rmo2008-002-510_a
1. Damping pads
4. Secure upper portion of license plate on vehicle
plate support using existing hardware.
5. Squeeze license plate and support together at
each lower corner.
Accessories Installation
1. Install accessories (if any) as per their installa-
tion instructions (included in each kit).
2. Install any other equipment required by law (if
any).
Vehicle Decals
1. Install decals on vehicle according to customer
country language and local legislation.
2. Ensure that the new decals are installed at the
same location and over the factory installed de-
cals.
FLUIDS
General Guidelines
All fluids (except fuel) have already been filled
at factory, it is only necessary to validate them.
However, if refill is needed, refer to the appropri-
ate
ROADSTER SHOP MANUAL
for the proper
procedure.
Fuel
1. Add fuel in the fuel reservoir.
rmo2008-001-016
FUEL RESERVOIR
Recommended Fuel
Use unleaded gasoline or oxygenated fuel con-
taining no more than 10% ethanol or methanol or
both. The gasoline used must have the following
minimum octane rating:
MINIMUM OCTANE RATING
North America
87 (R+M)/2)
Outside North America
92 RON
WARNING
Never top off the fuel tank before placing
the vehicle in a warm area. As temperature
increases, fuel expands and may overflow.
Fuel is flammable and explosive under cer-
tain conditions. Always wipe off any fuel or
oil spillage from the vehicle.
NOTICE
Other fuel can degrade vehicle per-
formance and damage critical parts in the fuel
system and engine.
NOTICE
Never mix oil with fuel these vehicles
are equipped with a 4-stroke engine.
14 / 37
2012-1
PREDELIVERY
