Can-Am outlander 400 series Скачать руководство пользователя страница 146 | Manualshive

Страница: 146 / 156

background image

BRP INTERNATIONAL LIMITED WARRANTY:
2007 CAN-AM

TM

ATV

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Products Inc. (“BRP”) warrants its 2007 Can-Am ATV
from defects in material or workmanship for the period and under the conditions
described below.

All genuine Can-Am ATV parts and accessories, installed by an authorized
Can-Am distributor/dealer (as hereinafter defined) at the time of delivery of the
2007 Can-Am ATV, carry the same warranty as that of the Can-Am ATV.

Use of the product for racing or any other competitive activity, at any point, even
by a previous owner; will render this warranty null and void.

2) WARRANTY COVERAGE PERIOD

This warranty will be in effect from the date of delivery to the first retail consumer
or the date the product is first put into use, whichever occurs first and for a period
of:

SIX (6) CONSECUTIVE MONTHS, for private use or commercial use owners.
Note that the effective warranty coverage period may, according to the applica-
ble and prevailing national or local legislation, vary

1

. Please contact your dealer

or distributor to know the specifics of your warranty coverage period.

The repair or replacement of parts or the performance of service under this war-
ranty does not extend the life of this warranty beyond its original expiration date.

3) CONDITIONS TO HAVE WARRANTY COVERAGE

This warranty coverage is available only on 2007 Can-Am ATVs purchased as
new and unused by its first owner from a Can-Am distributor/dealer authorized
to distribute Can-Am ATV products in the country in which the sale occurred
(“Can-Am distributor/dealer”), and then only after the BRP specified pre-delivery
inspection process is completed and documented. Warranty coverage only
becomes available upon proper registration of the product by an authorized
Can-Am distributor/dealer. Moreover, this warranty coverage is only available
if the Can-Am ATV is purchased in the country in which the purchaser resides.
BRP will not honor this limited warranty to any private use owner or commercial
use owner if the preceding conditions have not been met. Such limitations are
necessary in order to allow BRP to preserve both the safety of its products, and
also that of its consumers and the general public.

1

For EU member states the duration of the warranty coverage period is 24 months from

the date of delivery of the vehicle and the defect notification period is 2 months; any
other modalities of the warranty are subject to the applicable national or local legislation
governing the sale of consumer goods.

144

_____________________

«
...
144
145
146
147
148
...
»

Содержание outlander 400 series





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для outlander 400 series

Бренд: Yamaha Страницы: 26

Бренд: RIDGID Страницы: 40

Бренд: Aeon Страницы: 196

Бренд: Can-Am Страницы: 160

Бренд: Toro Страницы: 32

honey joy TY283250

Бренд: Costway Страницы: 28

2008 450 XC ATV

Бренд: KTM Страницы: 223

ESCALATE TRAILER ET 12000

Бренд: Bil-Jax Страницы: 20

250GKA-2Z Series

Бренд: Kandi USA Страницы: 16

2012 OCTANE SUPER LITE

Бренд: Jayco Страницы: 101

GRIZZLY YFM70GPXJ 2017

Бренд: Yamaha Страницы: 176

Бренд: Yamaha Страницы: 185

Бренд: Jula Страницы: 65

Бренд: Vetus Страницы: 56

Бренд: TRAILEX Страницы: 22

Бренд: TransTank Страницы: 20

Бренд: Simplicity Страницы: 58

Бренд: PowerMax Страницы: 110

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды