Can-Am 2008 DS 450 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 148

Can-Am 2008 DS 450 Скачать руководство пользователя страница 67

vmo2008-011-003_a

1. Adjustment cam
2. Brake lever
3. Adjustment position, when seated on the

vehicle

3) Clutch Lever

When compressed, the clutch is dis-
engaged. When released, the clutch
is engaged.

vmo2008-011-004_a

1. Clutch lever
2. To disengage
3. To engage



WARNING

Always release the throttle when
shifting

gears.

Shifting

gears

without

releasing

the

throttle,

could cause loss of control in-
cluding the vehicle to overturn
and mechanical damages.

4) Parking Brake

When applied, it temporarily prevents
the vehicle from moving.

Useful

when the brake needs to be locked for
example such as doing a K-turn, dur-
ing transportation or when the vehicle
is not in operation.

vmo2008-011-005_a

1. Parking brake



WARNING

Always use the parking brake
when the vehicle is not in oper-
ation.



WARNING

Make sure parking brake is fully
disengaged before operating the
vehicle.
When you ride the vehicle, brakes
that are caused to drag by a con-
tinuous pressure on the lever may
cause damage to the brake system
and cause loss of braking capacity
and/or fire.

To engage mechanism:

Squeeze

front brake lever and maintain while
moving lever lock with a finger. Front
brake lever is now compressed and
applying front brakes.

_____________________

65

«
...
65
66
67
68
69
...
»

Содержание 2008 DS 450





















































































































































Отзывы:

Нет отзывов