Camsat iCAM-Mobile HD II, Руководство пользователя

Страница: 21 / 44

5.5. Radio system configuration
A) Logging
To log in to the wireless module, set the computer's IP address in the same subnet as the
device (by default 192.168.1.21), then start the web browser (Internet Explorer recom-
mended) and enter the module's IP address. The login screen will appear on the screen.
To log in to the web user interface, enter the username and password (default username:
camsat, default password: camsat) and confirm with the Login button. The radio module
management interface will be activated.
B) Setting up the LAN network
The configuration should start with the configuration of the LAN parameters. Go to the
CAMERA CONNECTION SETTINGS > Network Settings. The following screen will appear:
•
IP Address
Enter a free (not used yet) IP address
from your network e.g. If your recorder
has the address 192.168.1.50, IP came-
ra: 192.168.1.51 then enter another free
address e.g. 192.168.1.52 The IP ad-
dress must be on the same subnet as
the computer.
•
Subnet Mask
Usually 255.255.255.0. The subnet mask
should be identical throughout the local
network.
•
Default Gateway
Entering the gateway IP address is ne-
cessary only if the device will also work
outside the local network. Remember to
set a unique IP address for the local ne-
twork (each device and module must
have a unique IP address). The default
gateway should be identical throughout
the local network.
•
DHCP Server
It is recommended to check this option to allow mobile devices to automatically ob-
tain an IP address without additional configuration.
Changes are confirmed with the Save Changes button.
After changing the IP address and saving the settings, the device may
automatically reset and you will need to log in again.
Page 21