f)
Description of indicators and joints
LED POWER indicator – lights up to indicate connected power
MODE indicator – type of video standard – lights up to indicate detected video signal in CVI
or TVI standard; only in the transmitter.
g)
Recommendations
1. The system works in analog FM standard and may be exposed on interference
caused by other radio systems. Before the installation check the occupancy of 5GHz
band in the vicinity of the installation.
2. Larger systems containing a few sets should be launched and set in sequence, i.e.
connect the next set only after precise configuration and launching previous set.
3. Due to generating interferences it is not recommended use of cheap switch-mode
power supplies and other power supplies than intended to use, for example CAMSAT
ZS12/1A.
4. It is not recommended to connect transmitter with receiver to one shared power
supply. It is possible to use one power supply with few receivers and another power
supply with few transmitters.
5. It is recommended to install the transmitters at the distance of 6-7m from other
wireless systems like GSM or Wi-Fi.
6. High-quality coaxial-cables should be used.
CAM-Analog2.0 Instrukcja
9
