HDR bracketing is not available for Sony cameras. However, Sony provides a large number of
built-in capture modes to perform bracketed captures.
HDR sequences can also be saved and then restored later. Press the database icon
in the bottom left of the HDR dialog. A dialog will appear allowing the current
sequence to be saved or previous sequences to be applied.
Timer Tab
The Timer tab is accessed by pressing the
stopwatch button and is used to configure the
CamRanger as an intervalometer as well as specify
exposure times when the camera is bulb mode.
The initial delay is the amount of time to delay
before the sequence is started. This can be useful
for making a custom timer mode with a set delay.
The number of shots to take must be entered as well as the time between shots. Note that
depending on the camera, the time between shots may be longer than entered if the time is
less than a few seconds.
© CamRanger, 2019
US Patent 9712688
10/04/19
19
