Setup
•
Set up the camera
Depending on the camera and workflow, it may be necessary to adjust camera settings.
Please refer to the appendix at the end of this document for more details.
•
Charge CamRanger 2
Charge the CamRanger 2 battery as described in the battery section.
•
Download the CamRanger 2 app
The CamRanger 2 is downloaded from the Apple App Store on your iPad/
iPhone. The easiest way to find it is to search “CamRanger 2” within the App
Store app.
The CamRanger 2 app requires iOS 9+.
•
Connect the camera to the CamRanger 2
Connect the camera to the CamRanger 2 using the appropriate type of USB cable. An angled
USB mini cable is provided, which works for many cameras. However, some cameras use
di
ff
erent cable types. The camera came with the correct cable, or another cable can be
purchased.
The CamRanger 2 should not be allowed to hang from the camera by the USB cable. The
USB cable connections should not be stressed. The CamRanger 2 can be attached using the
provided hot shoe adapter and 1/4” 20 mount. The mount can also be used to connect to a
quick release clamp allowing attachment to a plate or L-bracket. Quick release clamps are
available at CamRanger.com.
The camera may need to be configured to allow the CamRanger 2 to communicate with it via
USB. Often in-camera WiFi must be disabled. Additionally, some cameras have a USB mode/
connection that must be set to PTP/PC Remote.
© CamRanger, 2019
US Patent 9712688
10/04/19
10
