Guide to Fitting Campsmart Anti Flap Kit for Fiamma
F45S Awnings
DETAILS
Version:
18
th
October 2022
Background:
The Campsmart Anti Flap Kit (AFK) is designed for the Fiamma F45S (Sized 3.0m and above).
The pair of aluminum AFK bars slot together and clamp down along the edge of the awning
fabric, eliminating flapping & increasing the structural strength of the awning. A built-in sail track
allows for the attachment of privacy screens or annexe walls with a standard 6mm rope spline.
Parts
Included:
•
Anti Flap Kit Bars (4 sections
– 2 per side)
•
2x Insert Bars (joins each section together)
•
2x Mounting Brackets (to be installed inside the casing)
•
2x Black End Inserts (used with the current Fiamma F45S)
•
Instructions
Figure 1:
Supplied
Parts
(Insert Bars,
Mounting
Brackets &
Black End
Inserts)
Figure 2:
Supplied
Parts
(AFK Bars with
Black Insets
installed)
Compatibility
•
This product is designed to fit the Fiamma F45S awnings from 3.0m and above in size
with awning projections of 2.5m (Note at least 2.4m is required).
The projection is measured from where the awning fabric attaches to the RV along the
underside of the awning to the inside edge of the outrigger (where the AFK will join onto
the leg fittings).
•
Note smaller sized awnings (such as the 2.6m 260) have smaller projections which are
not suitable for this Anti Flap Kit.
•
Important:
While it may be possible to cut the product down to suit smaller projections
please note this will void the warranty and returns policy.
