Campo Equipment Blaze EB400G, Руководство по устранению неисправностей

Страница: 2 / 44

•
Before resetting the burner control, ensure you have between 7- 14” WC
pressure supplied to the gas valve.
•
Ensure the ‘switchover valve’ is in the proper position for LP OR NG
Burner is locked out on reset
•
You reset the control and it goes through the 60 second purge, but doesn’t
ignite……
Page 3
•
You Reset the Burner Control. The Burner motor Does Not Start and the
Burner Control Locks-
out on Reset… Page 10
•
You Reset the Burner Control, but the reset light is solid red during the pre-
purge, and the control locks out on reset… Page 13
•
You Reset the Burner Control and after the pre-purge, the burner fires up,
but the flame goes out after 5 to 10 seconds... PAGE 14
2
HOME