Campbell TX321 Скачать руководство пользователя страница 57

Страница: 57 / 86

C-1

Appendix C. GOES Data Formats

C.1 Data Formats

Data transmissions are generally described as having an ASCII or Pseudo

Binary format. The particular nature of how the data is formatted and ordered

is determined by the content and organization of the data tables and execution

of the

GOESData()

instruction. Scan-order (interleaved) and channel-order

data can be sent by using an ASCII or Pseudo Binary format with one of the

data logger native data format options. The flexibility of CRBasic allows

virtually any message type to match the decode system requirements.

C.2 ASCII

The ASCII data format is used to transmit data in plain readable text. This

format is widely used for self-timed transmissions. Several standard formats

are selectable within CRBasic. Formats not included can be easily formed

using STRING formatted data fields, allowing the content to be tailored to your

application needs.

C.2.1 7-Byte Floating Point ASCII

The 7-byte floating point ASCII data type is a fixed-width format with variable

precision.

•

Operating range of –7999 to +7999

•

Variable precision of 0.001 to 1

•

Precision (placement of decimal point) is automatically determined based

on the magnitude of the value. See the following chart for reference.

•

Number will be rounded to selected precision during conversion, for

example, +12.345 will be rounded to +12.35.

•

Value is always 7 characters.

•

Value is always signed (+/-).

•

Value always has trailing comma.

•

Valid data outside of operating range will be pegged at –7999 or +7999.

Range

Max Precision Example ASCII Output

–7.999 to +7.999

0.001

+1.200,

–79.99 to +79.99

0.01

+12.00,

–799.9 to +799.9

0.1

+120.0,

–7999 to +7999

+1200.,

NAN

= –8190.,

+INF = +8191.,

–INF = –8191.,

Not A Number

Содержание TX321






















































































Результаты поиска

Содержание TX321

Отзывы:

Campbell TX321, Руководство по эксплуатации продукта, Страница: 57 / 86

Результаты поиска

Содержание TX321

Отзывы: