Campbell TX321 Скачать руководство пользователя страница 38

Страница: 38 / 86

TX321 Transmitter

TABLE 7-3. GOESStatus Command 2: Read Last Message Status

Index

Contents

Longitude degrees

Longitude minutes

Longitude seconds

7.5.3 GOESGPS

Example:

Public GPSdata(

)

GPStime(

)

GOESGPS(

GPSdata(), GPStime()

)

7.5.4 GOESSetup

The instruction

GOESGPS()

returns two arrays of information. The first array

is six elements long. The first array includes the result code (see TABLE

8-1

time in seconds since January 1, 2000, latitude in fractional degrees with 100

nanodegree resolution, longitude in fractional degrees with 100 nanodegree

resolution, elevation as a signed 32-bit number in centimet

s, and magnetic

variation in fractional degrees with a one millidegree resolution.

The second array, which must be dimensioned to seven, holds year, month,

day, hour (GMT), minute, seconds, microseconds. The second array can be

used to set the data logger clock. See the

ClockSet()

instruction in the

CRBasic

Editor Help

for details.

GOESSetup()

, all parameters can be variables of type long, except for the

Timed Interval

Timed Offset

, and

Random Interval

, which are all of type

string.

The

GOESSetup()

and

GOESData()

only return error messages at run time.

Using

GOESSetup()

, the data logger can configure the transmitter under

program control. Because the parameters in the

GOESSetup()

instruction can

be variables, error checking is done at run time, not compile time. Using

GOESSetup()

, the custom display menu options, and the data logger

keypad/display, programs can be written to allow TX321 configuration via

simple menus on the keypad/display. See

DisplayMenu()/EndMenu

in the

CRBasic Editor Help

for details.

GOESSetup()

can also be used with constant

values allowing fixed GOES configuration parameters to be stored in the data

logger, and executed when needed.

After

GOESSetup()

executes, several TX321 settings are set to default values.

Messages are not centred in the transmission window.

Self-timed message format is set to ASCII, which ONLY changes the flag

word. Pseudo Binary formats will still work.

Random message format is set to ASCII, which ONLY changes the flag

word. Pseudo Binary formats will still work.

Empty buffer message is turned off.

Randomizing percentage is set to 50%.

Содержание TX321






















































































Результаты поиска

Содержание TX321

Отзывы:

Campbell TX321, Руководство по эксплуатации продукта, Страница: 38 / 86

Результаты поиска

Содержание TX321

Отзывы: