Campbell TX321 Скачать руководство пользователя страница 36

Страница: 36 / 86

TX321 Transmitter

7.5.2 GOESStatus()

The

GOESStatus()

instruction is used to read information from the TX321.

Information that can be read and stored in the data logger includes information

relating to the next transmission, the last transmission, GPS time and position,

and all logged errors. The status information can be used to set the data logger

clock and troubleshoot any problems that might arise. The

GOESStatus()

instruction also includes options to initiate a random transmission on

command.

The

GOESStatus()

instruction includes seven different functions:

Read Time,

Read Status, Read Last Message Status, Transmit Random Message, Read

Error Register, Clear Error Register, Return Transmitter to Online Mode

Transmit Random Message

Read Error Register

Clear Error

Register

, and

Return Transmitter to Online Mode

are for use with

previous versions of the GOES transmitter and will not be

described here.

GOESStatus()

expects two parameters. The first is the array used to store the

data returned by

GOESStatus()

; the second is the command to be issued. The

first element of each array returned by the

GOESStatus()

command is the

result code. The result code is used to test if the

GOESStatus()

instruction

executed successfully. When the result code is zero,

GOESStatus()

executed

successfully.

7.5.2.1 GOESStatus Read Time

Example:

Public gps(

)

GOESStatus(

gps(), 0

)

Command

(Read Time) will read the TX321 clock. Under normal operating

conditions, the time is GMT. There are delays in reading the time from the

TX321. The array needs to be four elements or more. As shown in TABLE

7-1

data is returned as: result code, hour, minute, second.

TABLE 7-1. GOESStatus Command 0: Read Time

Index

Contents

Command Result Code

Hours (GMT)

Minutes

Seconds

7.5.2.2 GOESStatus Read Status

Example:

Public Stats(

)

GOESStatus(

Stats(), 1

)

NOTE

Содержание TX321






















































































Результаты поиска

Содержание TX321

Отзывы:

Campbell TX321, Руководство по эксплуатации продукта, Страница: 36 / 86

Результаты поиска

Содержание TX321

Отзывы: