Campbell TX321 Скачать руководство пользователя страница 68

Страница: 68 / 86

Appendix D. Extended ASCII Command Set

D-8

D.3.9 Set Self-Timed Transmission Preamble Length

Syntax:

TPR=S/L

Access level: USER

TX321 state: Disabled

Set the preamble type for timed transmissions. Valid values are S or L (Short

or Long). This setting only applies for 100 bps timed transmissions on channels

1 – 200. All 300 and 1200 bps transmissions us short preamble. All 100 bps

transmissions on channels above 200 use long preamble.

D.3.10 Set Self-Timed Transmission Interleaver Mode

Syntax:

TIL=S/L/N

Access level: USER

TX321 state: Disabled

Set the timed transmission interleaver type. Valid values are S, L, or N (Short,

Long or None). This setting only applies for HDR (high data rate) timed

transmissions, for example 300 or 1200 bps. Setting does not apply to CS2

devices.

D.3.11 Set Self-Timed Transmission Data Format

Syntax:

TDF=A/P/B

Access level: USER

TX321 state: Disabled

This command sets the timed transmission format to ASCII, Pseudo Binary or

Binary. Valid values are A, P or B. This parameter is used to determine the flag

word in 300 and 1200 bps transmissions.

Note: It is the responsibility of the host to ensure the data provided for

transmission is in the proper format. ASCII data cannot be transmitted when

Pseudo Binary format is selected. Pseudo Binary can be transmitted with

ASCII format has been selected.

D.3.12 Set Random Transmission Channel Number

Syntax:

RCH=ccc

Access level: USER

TX321 state: Disabled

This command sets the channel number for random transmissions.

ccc

is the

channel number and has a valid range of 0 – 266 for bit rates of 100 and 300

bps and a range of 0 – 133 for a bit rate of 1200 bps.

Содержание TX321






















































































Результаты поиска

Содержание TX321

Отзывы:

Campbell TX321, Руководство по эксплуатации продукта, Страница: 68 / 86

Результаты поиска

Содержание TX321

Отзывы: