Campbell TX321 Скачать руководство пользователя страница 64

Страница: 64 / 86

Appendix D. Extended ASCII Command Set

D-4

D.2.6 Enable Transmissions

Syntax:

ETX

Access level: USER

TX321 state: Disabled

This command enables transmissions. The configuration parameters will be

checked for validity. If valid, they are saved to non-volatile memory and the

transmitter is enabled. The enabled/disabled state of the transmitter is also

stored in non-volatile memory so that it will resume operation after a power

cycle if it was previously enabled.

Note that the factory default configuration is

not

valid. The factory default

parameters must be explicitly overwritten with valid values before

transmissions can be enabled.

D.2.7 Disable Transmissions

Syntax:

DTX

Access level: USER

TX321 state: Enabled

This command disables transmissions. Normal scheduling of transmissions is

suspended.

Note that the transmitter is automatically disabled if configuration parameters

are modified and must be re-enabled with the ETX command to resume

transmitting.

D.2.8 Read Configuration

Syntax:

RCFG

Access level: USER

TX321 state: Enabled/Disabled

This command lists all of the configuration parameters. Each parameter is in

the same format as if its individual command had been executed.

For Example:

RCFG

NESID=326d31d4

TCH=92

The output from the RCFG command can be captured by the host (in a text

file) and used to duplicate the configuration in another unit.

Содержание TX321






















































































Результаты поиска

Содержание TX321

Отзывы:

Campbell TX321, Руководство по эксплуатации продукта, Страница: 64 / 86

Результаты поиска

Содержание TX321

Отзывы: