Campbell TX321 Скачать руководство пользователя страница 33

Страница: 33 / 86

TX321 Transmitter

unobstructed view of, the better the GPS performance. Better GPS performance

will show up as less or no missed transmissions. Poor GPS antenna placement

will increase the number of missed transmissions, or possibly stop all

transmission.

7.5 CRBasic Programming

This section covers CRBasic programming concepts. Not all options are

available for the CR5000 and CR295(X) data loggers. There are four program

instructions directly related to the TX321 GOES transmitter:

GOESData

GOESStatus

GOESGPS

and

GOESSetup

7.5.1 GOESData()

The

GOESData()

instruction is used to send data from the data logger to the

TX321 transmitter. Each time

GOESData()

is executed, data is ordered with

the newest data to be transmitted first.

There are five parameters to the

GOESData()

instruction:

Result Code

Data

Table

Table Option

Buffer Control

, and

Data Format

GOESData()

Table Option

Buffer Control

and

Data Format

can be

variables declared as type long. Error checking is done at run time instead of

compile time. See Section

8.3

Result Codes

(p. 29)

, for run-time error codes and

their descriptions.

CRBasic data loggers store time of maximum or minimum as number of

seconds since 1990, which does not work for GOES transmission.

7.5.1.1 Result Code

The

Result Code

is used to determine if the

GOESData()

instruction executed

successfully. When successful,

GOESData()

will return a

to the

Result Code

variable. When

GOESData()

executes successfully, but there is no new data in

the specified table, the

Result Code

is set to

100

. See Section

8.3

Result Codes

(p. 29)

, for details regarding result codes.

7.5.1.2 Data Table

The

Data Table

argument is used to specify which data table the

GOESData()

instruction is to copy data from.

7.5.1.3 Table Option

The

Table Option

is used to specify what data is copied from the data table.

There are three options. Use

to specify all new data. Use

to specify only the

most current record. Use any other positive number to specify the number of

records to be copied each time

GOESData()

is executed. When copying data,

the entire record, except the timestamp and record number, is copied from the

data logger to the TX321 transmitter.

7.5.1.4 Buffer Control

Buffer Control

is used to determine which buffer data is copied to, and if the

buffer is erased before data is copied to the buffer. Use

to append to the self-

timed buffer; use

to overwrite the self-timed buffer. Use

to append to the

random buffer, and

to overwrite the random buffer. Use

to erase the

random buffer.

Содержание TX321






















































































Результаты поиска

Содержание TX321

Отзывы:

Campbell TX321, Руководство по эксплуатации продукта, Страница: 33 / 86

Результаты поиска

Содержание TX321

Отзывы: