Campbell TempVue 10, Руководство по эксплуатации продукта

Страница: 24 / 31

Appendix B. Example programs
These CR1000X example programs measure the resistance and convert the resistance to
temperature in degree Celsius.
CRBasic Example 1 (p. 23) uses the 4-wire configuration to
measure the TempVue 10. The DUT offset is entered at the beginning of the program as a
variable. This value needs to be changed according to the calibration certificate.
CRBasic Example 2 [p. 24] uses the 2-wire configuration to measure the TempVue 10. The 2-wire
configuration uses fewer terminals, but the 4-wire configuration provides more accurate
measurements.
The following table provides wiring for the example programs.
Table B-1: Wiring for example program
Color
CR1000X
2-wire connection
CR1000X
4-wire connection
Brown VX1 VX1
Orange SE1 2H
Purple not used 2L
Yellow not used 1H
Blue not used 1L
Black ⏚ (analog ground) ⏚ (analog ground)
Clear ⏚ (analog ground) ⏚ (analog ground)
The white and gray wires are not used.
TempVue 10 PT-100 Class A, Precision Air Temperature Sensor
22