Open Path Eddy Covariance System
27
FIGURE 20. Destination File Option Screen
To create an EdiRe raw format file list using the Interpreter, save
the data in the TOB1 file format. If another format is needed at a
later date, convert the TOB1 files into the other file format (see
Figure 19).
•
Set the file size (Bale size) in the “Time Settings” screen. For the
time series files, use a one hour file size and for the online flux data,
use a one day file size.
Practice converting the data from the card and processing it with
your off-line tools. Only through this type of experimentation
will you determine the file sizes that work best for you.
•
Finally, change the output file name. The default output file name is
TOB1_
stationname
.ts_data.dat, where
stationname
is the datalogger’s
station name and can be set using DevConfig.exe (part of LoggerNet).
The factory default station name is the datalogger serial number.
Right click on the
stationname
.ts_data file and select “Change Output
File”.
If any other parameters are later changed, CardConvert will
return to the default output file name.
•
Click on the “Start Conversion” to start the conversion process
(Figure 21).
TIP
TIP
NOTE