Campbell LWS, Инструкция по эксплуатации

Страница: 10 / 26

LWS Dielectric Leaf Wetness Sensor
4. Quickstart
Short Cut is an easy way to program your datalogger to measure the LWS and
assign datalogger wiring terminals. The following procedure shows using
Short Cut to program the LWS.
1. Install Short Cut by clicking on the install file icon. Get the install file
from either www.campbellsci.com , the ResourceDVD, or find it in
installations of
LoggerNet
,
PC200W
,
PC400
, or
RTDAQ
software.
2. The Short Cut installation should place a Short Cut icon on the desktop of
your computer. To open Short Cut , click on this icon.
3. When Short Cut opens, select New Program .
2