Campbell HydroSense II HS2, Руководство по эксплуатации продукта

Страница: 23 / 50

HS2 and HS2P
11
6.4.2 Configuring Soil Profiles
When Deficit Mode is enabled (Section 7.3.4 , Deficit Display
(p. 17)
), soil
profiles are accessed from the
main screen
(p. 15)
of the HydroSense II. To
select the current soil profile (“SOIL 1” in the preceding figure), press the
button. The soil profile number will be highlighted. To open the soil profile
list, press
.
The soil profile list should be displayed. Use to move through the list
to the desired soil profile and press .
A soil profile page will be displayed. This page shows the reference values
stored for this soil profile and the rod length used.
To select this soil profile to apply to the current measurement, press to
highlight SELECT THIS SOIL and press .
New reference values can be set from the soil profile screen. To do so,
correctly insert the sensor in the reference soil and select “WET VWC” or
“DRY VWC” and press
.