Campbell CSAT3B, Инструкция по эксплуатации, Страница: 71 / 88

CSAT3B Three-Dimensional Sonic Anemometer
3. After connecting to the CSAT3B, click on the Send OS tab at the top
of the
Device Configuration Utility
main screen. Click on the Start
button at the bottom of the page, select the .obj file that you
downloaded from the Campbell website, and click Open . The OS
will then be sent, followed by a confirmation message that it was
loaded properly.
FIGURE 9-5. The Send OS screen in the Device Configuration Utility
9.6 Returning the CSAT3B
If there is need to return the CSAT3B either for calibration or repair, please
follow the detailed instructions provided in the
Assistance
section at the
beginning of this manual which gives instructions for generating an RMA
number. If additional help is needed, please contact an application engineer at
Campbell Scientific. When preparing the CSAT3B for shipment, be sure to
package it in the same foam that it was sent in. If the foam cannot be found,
new foam should be ordered from Campbell Scientific before returning the
unit.
10. Reference and Attributions
10.1 References
Liu, H., Peters, G. and Foken, T.: 2001, “New Equations for Sonic
Temperature Variance and Buoyancy Heat Flux with an Omnidirectional Sonic
Anemometer”, Boundary-Layer Meteorol. , 100 , 459-468.
61