Campbell CSAT3B, Инструкция по эксплуатации, Страница: 15 / 88

CSAT3B Three-Dimensional Sonic Anemometer
FIGURE 4-5. Cable connections for CPI
2. Connect power and communication cable(s) to datalogger.
SDM Communications
If using SDM communications, connect the wire leads on the end of the
CSAT3BCBL1-L cable to the datalogger SDM and power ports according
to TABLE 4-1. Refer to FIGURE 4-6 which shows these connections to a
CR1000 datalogger.
TABLE 4-1. Wiring Diagram for CSAT3B with SDM
Communications
Datalogger Terminal Wire Color
12 V (or other 9.5 to 32 Vdc source) Red
Ground Black
Ground Brown
SDM C1 White
SDM C2 Yellow
SDM C3 Blue
Ground Clear
5