Campbell CS110, Инструкция по эксплуатации, Страница: 40 / 86

CS110 Electric Field Meter
30
10. Maintenance
10.1 Checking Site Ground Integrity
The CS110 electric field meter needs to be electrically connected to Earth ground
for valid measurements. It is recommended that the integrity of this Earth Ground
connection be checked periodically by verifying that the resistance of the stator to
Earth Ground rod is <1
Ω
.
10.2 Corrosion and Rust Inhibitors
In corrosive environments, metal friction points (set screws, bolts, etc.) and
electrical connections to earth ground can be protected with the use of a rust
inhibitor. Sanchem makes such an inhibitor and some information on their
products may be found at http://www.sanchem.com/ox.html. Following is an
excerpt from their web site:
“NO-OX-ID A-SPECIAL is a soft, wax based rust preventive and lubricant that
contains an active rust inhibitor and small amount of solvent for ease of
application. This corrosion resistant coating can be applied by spray or brush
application. NO-OX-ID A-SPECIAL controls corrosion by leaving a thick, semi-
transparent, non-drying barrier coating that retains its anti-rust properties
indefinitely.
NO-OX-ID A-SPECIAL is the electrical contact grease of choice in new electrical
installations and maintenance because of its excellent performance in keeping
metals free from corrosion. This rust preventative has been used for over 50 years
to prevent corrosion in electrical connectors from low micro-power electronics to
high voltage switchgear. NO-OX-ID A-SPECIAL prevents the formation of
oxides, sulfides and other corrosion deposits on copper surfaces and conductors
can be prevented with its use.”