Campbell CS110 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 86

Campbell CS110 Скачать руководство пользователя страница 3

Guarantee

The

CS110 ELECTRIC FIELD METER

(CS110) is warranted by CAMPBELL

SCIENTIFIC, LTD. to be free from defects in materials and workmanship under
normal use and service for twelve (12) months from date of shipment unless
specified otherwise. Batteries have no warranty. CAMPBELL SCIENTIFIC
LTD’S obligation under this warranty is limited to repairing or replacing (at
CAMPBELL SCIENTIFIC LTD’S option) defective products. The customer shall
assume all costs of removing, reinstalling, and shipping defective products to
CAMPBELL SCIENTIFIC, LTD. CAMPBELL SCIENTIFIC, LTD. will return
such products by surface carrier prepaid. This warranty shall not apply to any
CAMPBELL SCIENTIFIC, LTD. products which have been subjected to
modification, misuse, neglect, accidents of nature, lack of maintenance or shipping
damage. This warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability or fitness for a particular purpose.
CAMPBELL SCIENTIFIC, LTD. is not liable for special, indirect, incidental or
consequential damages from the use, failure or malfunction of the CS110. In no
event will CAMPBELL SCIENTIFIC, LTD. have liability in excess of the
purchase price for the CS110. CAMPBELL SCIENTIFIC, LTD. does not warrant
that the CS110 will meet customer’s requirements or that its operation will be
uninterrupted or error-free. Atmospheric or local electric field conditions or
different site characteristics may cause false information, late data, or otherwise
incomplete or inaccurate data. The CS110 only measures conditions that make
lightning more likely. Just as with weather forecasts, the CS110 measurements
only help assess the probability of lightning. Lightning can occur causing personal
injury, even death, or damage to property without any warning from the CS110.

Please inform us before returning equipment and obtain a Repair Reference
Number whether the repair is under guarantee or not. Please state the faults as
clearly as possible, and if the product is out of the guarantee period it should be
accompanied by a purchase order. Quotations for repairs can be given on request.

When returning equipment, the Repair Reference Number must be clearly marked
on the outside of the package.

Note that goods sent air freight are subject to Customs clearance fees which
Campbell Scientific will charge to customers. In many cases, these charges are
greater than the cost of the repair.

Campbell Scientific Ltd,

Campbell Park, 80 Hathern Road,

Shepshed, Loughborough, LE12 9GX, UK

Tel: +44 (0) 1509 601141

Fax: +44 (0) 1509 601091

Email: [email protected]

www.campbellsci.co.uk

«
1
2
3
4
5
...
»

Содержание CS110























































































Отзывы:

Нет отзывов