Figure 7-7. Device Configuration Utility RF451/RF452 summary screen
7.7.1.2 Configuring the CRVW3–RF451/RF452
1. Provide power to the CRVW3 as described in
Providing temporary power to the CRVW3
19).
2. Connect the CRVW3 and computer using a USB cable.
3. In
Device Configuration Utility
, choose CRVW Series, select the CRVWx Communication
Port. Connect.
4. In the Settings Editor tab, select the Radio sub-tab.
5. Set the following settings:
Table 7-3: Base radio settings
Name
Setting
Radio Enabled
True
Radio Operation Mode Endpoint
Frequency Key
Leave at 5 (matches RF451/RF452)
RF Transmit Power
Leave at 8
Low Power Mode
Leave at 2
CRVW3 3-Channel Vibrating-Wire Data Logger
31