Campbell CR800 Series, Руководство оператора

Страница: 537 / 598

Appendix A. Info Tables and Settings
537
In many cases, the Info Tables and Settings keyword can be used to pull that field
into a running CRBasic program. See Info Tables and Settings — Setup Tools
(p.
107).
Two data types are identified as being associated with Info Tables and Settings.
These are Numeric and String. For most applications, the CR800 operating system
will handle the nuances of Numerics, which can end up one of several CRBasic
data types.
Info Tables and Settings: B
Keyword Data Type
R
ead
O
nl
y
• Where to Find
Description
Battery Numeric Y
•
Station Status field: Battery Voltage
• Status table field: 13
Voltage (Vdc) of the battery connected to the
POWER IN 12V
and
G
terminals.
Measurement is made during auto (background) calibration. This measurement is made
with less settling time than the CRBasic Battery() instruction. Updates when auto self-
calibration executes (once per minute).
Baudrate()
Numeric
• Settings Editor: Com Ports Settings: Baud Rate
Array of integers setting baud rates for communication (COM) ports.
Beacon()
Numeric
•
Settings Editor: Com Ports Settings | Beacon Interval
Governs the interval at which the CR800 broadcasts PakBus messages on the selected COM
port to discover new neighboring nodes, and it governs the default verification interval if
the value of the Verify
(p. 552)
setting for the selected port is 0 .
BuffDepth Numeric Y
• Status table field: ≈35
Shows the current pipeline mode
(p. 151)
processing buffer depth, which indicates how far the
processing task is currently behind the measurement task. Updated at the conclusion of scan
processing, prior to waiting for the next scan.
Info Tables and Settings: C
Keyword Data Type
R
ead
O
nl
y
• Where to Find
Description
CalDiffOffset()
2 Numeric

• Status table field: ≈ 49
Array of integers reporting differential offsets (mV) for each integration / range
combination. Updated by auto self-calibration when required. Updated by auto self-
calibration.